Glass-Trac Reflex Gages use prism glass to provide an excellent indication of the liquid level. All liquids appear black in high contrast to the mirror-like surface above. This clean line of separation can be sighted from many yards away. Reflex Gages are made in three pressures series (maximum 4000 psig @ 100ºF) and are tapped for ½” or ¾” NPT connections. The standard Glass-Trac level gages are designed for minimum -20ºF service.  On Glass-Trac Reflex Close Hook-up Gages with ½” NPT connections, the center-to-center dimensions is the same as the overall length on standard gages.

More Information

Glass-Trac Transparent Gages use clear, see- through glass on both sides so that both the color and the interface of liquids can be viewed. Electric lighted gage illuminators are available for use on Transparent Gages and provide easy viewing of liquid levels in dimly lighted areas. Transparent Gages are made in three pressure series (maximum 3000 psig @ 100ºF) and are tapped for ½” or ¾” NPT connections. The standard Glass- Trac level gages are designed for -20ºF service.  On Glass-Trac Transparent Close Hook-up Gages with ½” NPT connections, the center-to- center dimension is the same as the overall length on standard gages. On Close Hook-up Gages with ¾” NPT connections the center-to-center dimensions is the same as the overall length on standard gages plus ⅜”.

More Information

The Quest-Tec Solutions See-Level™ LED Illuminator for hazardous locations utilizes the latest technology to provide brilliant green back lighting to any process gage. Innovative circuitry allows for the use of an individual light source every ½” along the length of any gage. With a life span of over 100,000 hours each, the LED's last 200 times longer than incandescent bulbs. Even in the event of an individual lamp failure, the design provides lighting overlap ensuring that the fluid level is always illuminated. All of this is accomplished with a meager 5 watts of power usage.

More Information

For 600 PSI Working Steam Pressure (WSP) Steam-Trac ST-600 steam gages are ruggedly built to set the industry standard for reliabiity. All materials and construction standards are within strict compliance of ASME Section 1 code requirements.  The Steam-Trac ST-600 can be configured to replace less durable, more expensive, competitive models or for specific construction projects. Visible range must be achieved by using multiple sections with a 1” minimum overlap to ensure continuous visibility, as required by ASME Section 1, PG-60.

More Information

For 1000 PSI Working Steam Pressure (WSP)

Steam-Trac ST-1000 steam gages are ruggedly built to set the industry standard for reliability. All materials and construction standards are within strict compliance of ASME Section 1 code requirements.

More Information

For 1600 PSI Working Steam Pressure (WSP)  Steam-Trac ST-1600 steam gages are ruggedly built to set the industry standard for reliability in the difficult mid-pressure range from 1000 to 1600 PSI Working Steam Pressure. All materials and construction standards are within strict compliance of ASME Section 1 code requirements.

More Information

For 3000 PSI Working Steam Pressure (WSP)  The Steam-Trac STB-3000 Bi-Color Ported Gage must be used with a red/green filter illuminator. The gage chamber is constructed with opposing ports at an angle so that red light will pass unimpeded through the gage in the steam phase. When water is present, refraction will allow green light, only, to pass through. The result is a clear visual indication of water level.

More Information

The Steam-Trac STBI-3000 Illuminator matches long lasting LED lamps to a rugged fabricated enclosure to set an unsurpassed standard of reliability for bi-color water gage illumination. Each port has 4 each red and green LEDs to provide a brilliant display. To comply with ASME Section I, PG60, a ported gage must provide a means for obvious discrimination between steam and water. This requirement mandates that a ported gage must have a working illuminator.

More Information

Our Level-Trac liquid level product line includes water columns and probes capable of operating successfully in applications up to 3000 psi working steam pressure as well as a broad line of Water Detection Control Units and Alarms.

More Information

The Level-Trac Model LT-201 control unit is completely solid state with a discrete path for each probe channel. Failure of any probe channel in the system will not result in the failure of adjacent probe channels.

More Information

Twelve, Fourteen or Sixteen Probe Channels - Independent Power Supply Units - Fault Tolerance, Fault Alarm Output  - Probe Cable Monitoring - Integral 4-20mA Output - Level Alarms, High Integrity Trip Functions - No Maintenance or Routing Testing -  Clear, Highly Visible Display -  Remote Display LTI-202 Available

More Information

Level-Trac probe upgrade kits offer a better value as compared to original equipment manufacturers. All these probes feature:
- Hydrostatically test to twice the rated pressure
- Helium leak test
- Ceramic to metal vacuum brazing
- Two year guarantee of trouble-free service regardless of the original equipment manufacturer 

More Information

Our Level-Trac liquid level product line includes water columns and probes capable of operating successfully in applications up to 3000 psi working steam pressure as well as a broad line of Water Detection Control Units and Alarms.

More Information

Glass-Trac Type 1 & 2 Offset Gage Valves are available with screwed (S), union (U), (illustrated below) and tubular (T) gage connections (Page 15). Both 1 and 2 Valves are used with Reflex and Transparent Gages in working pressures up to 4000 psi and with Tubular Gages to their maximum rating. The Teflon packing ring is standard and used in services up to 450º F. For temperatures to 700º F, valves are fitted with special wire graphite packing. Both valves have stainless steel ball checks to shut off the flow automatically in case of gage glass breakage.

More Information

Glass-Trac Type 1 & 2 Offset Gage Valves are available with screwed (S), union (U), (illustrated below) and tubular (T) gage connections (Page 15). Both 1 and 2 Valves are used with Reflex and Transparent Gages in working pressures up to 4000 psi and with Tubular Gages to their maximum rating. The Teflon packing ring is standard and used in services up to 450º F. For temperatures to 700º F, valves are fitted with special wire graphite packing. Both valves have stainless steel ball checks to shut off the flow automatically in case of gage glass breakage.

More Information

Glass-Trac Type 1 & 2 Offset Gage Valves are available with screwed (S), union (U), (illustrated below) and tubular (T) gage connections (Page 15). Both 1 and 2 Valves are used with Reflex and Transparent Gages in working pressures up to 4000 psi and with Tubular Gages to their maximum rating. The Teflon packing ring is standard and used in services up to 450º F. For temperatures to 700º F, valves are fitted with special wire graphite packing. Both valves have stainless steel ball checks to shut off the flow automatically in case of gage glass breakage.

More Information

The Glass-Trac Type 4 Straight-Thru Gage Valve is available with screwed (S) and Union (U) gage connections and used with Reflex and Transparent Gages in working pressures up to 4000 psi. The “straight-thru” valve body design is popularly used with close hook-up (side connection) gages because the gage side connection centers and vessel centers can be identical. (With offset valves, vessel centers must be inside or outside side connection centers.) Type 4 Valves have a ¾” NPT Male Tank Connection as standard, with other connections available on order.

More Information

Glass-Trac Offset Tubular Gage Valves are identical to Type 1 and 2 S and U Valves except they are fitted with the ⅝” O.D. tubular glass connection. The Type 2T Valve also can be furnished in the coarse thread design and with quick-operating lever for remote operation by chain. Both valves have a molded Teflon packing ring and rubber glass gaskets as standard for services up to 250º F. For temperatures to 425º F, valves have wire-graphite packing and Viton® glass gaskets. In the event of tubular glass breakage, a stainless steel ball check closes the valve to prevent further loss of fluid.

More Information

Each Gage Repair Kit includes glass, gasket, cushions, bolts and nuts - everything you need to completely assemble yoru rebuilt gage like new!

More Information

Each Gage Repair Kit includes glass, gaskets, cushions, bolts and nuts - everything you need to completely assemble your rebuilt gage like new!

More Information

The Magne-Trac Gage product line is one of the safest and most economical ways to measure your liquid level requirements. In applications for extreme pressure, temperature, vibration, and highly corrosive or hazardous material, Magne-Trac level Gages will perform where others fail. Features include lower installation costs, easy to read liquid level and low maintenance. The Magne-Trac Gage product line is one of the safest and most economical ways to measure your liquid level requirements.

More Information

Magne-Trac Chamber: The chamber may be constructed of any non-magnetic material, including austenitic stainless steel, alloys such as Carpenter 20, and plastics. The chamber is typically mounted to the side of the vessel, with an inlet and outlet that will allow liquid level in the chamber to match the liquid level in the vessel in the same manner that traditional sight glasses work. Magne-Trac chambers are constructed in full compliance to ASME 31.1 and 31.3, and utilize flange end closures for float access.

More Information

Magne-Trac Indicator: The standard indicator consists of anodized aluminum housing, rotating flags, and a clear cover. The flags are uniquely constructed of high temperature molded nylon. The standard UV stable Yellow/Black colors are molded into the flags. The non-corrosive nature of the material eliminates problems often encountered with corrosion associated with the aluminum flag/stainless steel pins most commonly supplied in the market. Magne-Trac indicators are constructed with a UV, scratch resistant polycarbonate window as standard, eliminating nuisance breakage of glass and allowing a high integrity fit. The flags are a wide 1.4” to enhance viewing. Each flag is assembled around a high temperature rare earth magnet assembly that ensures a latching action to eliminate false indication due to vibration.

More Information